Voltage Tester Detector - Non Contact Santronics Ultimate AC Sensor
Proudly Made in the USA in Sanford, NC
With Audible AND Visual Alarms
Determine the presence or absence of 50-1000 volts AC in insulated wire, wall receptacles, fuses, junction boxes, switches and other voltage carrying electrical systems.
It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage.
Simply touch the plastic tip to a connection point or move it along a wire. In addition to the tip glowing red, if AC voltage is present, the Ultimate AC Sensor features an audio alert.
Handy Pocket Clip
Two AAA batteries included
CATIII & CATIV rated
The Benefits of the Ultimate AC Sensor
SANTRONICS ULTIMATE AC SENSOR Will Locate Voltage of 50-1000 VAC
This product can be used with low voltage items (signal level, telecommunications, electronic, etc.), to local levels, appliances to distribution level, fixed installation, etc.
Defective Grounds: Electrical equipment that has a metal enclosure and is improperly grounded or has a defective ground will always result in the Sensors tip emitting a steady red glow. If there is enough electrical field present on the metal enclosure, the result will be a steady red glow and an audible tone.
Always Ready For Use
No Switch required. Competing products require an ON/OFF switch. Switches must be turned on and can malfunction over time.
Sound & Visual Alert
Sound and bright red glow indicates the voltage.
With the Ultimate AC Sensor, the audio alert does not go off from contact with static electricity, it only reacts to AC voltage. Our AC Sensor is able to tell the difference between static charge and AC current. Competitors' audio alerts constantly go off when the tool comes in contact with static electricity.
Why Probe Tip Flickers This instrument is so reliable in locating voltage that it will react to static electricity by flickering. This is not to be confused with power company voltage which produces a steady glow. The audio buzzer will not react to static electricity.
-20c to +55c
RH/HR 95% (0-30c)
RH/HR 75% (30-40c)
RH/HR 45% (40-55c)
MADE IN THE USA